Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in Mahindra XUV500?

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Cabin air filter

In this tutorial we can see how to replace the cabin filter in the Mahindra XUV500, an extremely simple and fast operation. First of all let's position ourselves on the right front seat, both in case of left-hand drive and right-hand drive, then let's go under the dashboard and identify the long rectangular flap, located in the final area of the joint with the central tunnel. Then open it by unlocking the lower clip, remove the old filter and clean the housing from any residue. Finally, insert the spare part and reposition the door.

Posted on 24 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the key shell of the Mahindra Xuv500?
How do you replace the key shell of the Mahindra Xuv500?
Mahindra Xuv500 (2011-2018 / MK 1) In order to replace the key shell of the Mahindra Xuv500 you need to lift the key by pressing the appropriate button, so that you can pry inside its …
How to replace the gear knob of the Mahindra Xuv500.
How to replace the gear knob of the Mahindra Xuv500.
Mahindra Xuv500 (2011-2018 / MK 1) This short and simple video will show us the steps on how to disassemble and replace the gear knob of the Mahindra Xuv500. First, we get inside the c…
How to reset the service light on the Mahindra XUV500 display
How to reset the service light on the Mahindra XUV500 display
Mahindra Xuv500 (2011-2018 / MK 1) We see in this guide the procedure that will allow us to reset the oil change routine maintenance warning light, which appears on the central display…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos