Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Mahindra Bolero

Model: Mahindra Bolero MK 1 - Years 2000-2022
Part: Cabin air filter

In this tutorial, see how to replace the cabin filter in a Mahindra Bolero, a very simple and quick operation. First, sit in the passenger seat, then go under the dashboard and locate the long rectangular door positioned horizontally. Once you do this, open it by unlocking the side clip, remove the old filter, and clean the housing of any dirt residue. Finally, insert the new filter, ensuring to follow the correct orientation, usually indicated along the edge, and close the door.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Mahindra Bolero 2
Where is the fuse box located in the Mahindra Bolero 2
Mahindra Bolero (2021-2026 / MK 2) If you have the new Mahindra Bolero second series (2021-2023) and want to find out where the fuse box is located, just carefully read the following g…
Replace Engine Oil and Oil Filter on Mahindra Bolero
Replace Engine Oil and Oil Filter on Mahindra Bolero
Mahindra Bolero (2000-2022 / MK 1) Let's go through the guide on how to perform the routine maintenance oil change on the Mahindra Bolero. First, lift the vehicle and start by removing…
How to Remove the Cabin Air Filter in the Mahindra Bolero?
How to Remove the Cabin Air Filter in the Mahindra Bolero?
Mahindra Bolero (2000-2022 / MK 1) In this tutorial, you will see how to remove, clean, or replace the cabin air filter in the Mahindra Bolero, a very simple and quick operation. First…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos