Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Tail Light Bulb on a Maruti Baleno?

Model: Maruti Baleno MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear tail light bulb on a Maruti Baleno, open the rear hatch to expose the screws securing the tail light in its housing. Once these two screws are loosened, pull the tail light out of its housing and remove the bulb from its socket.

Then, disconnect it from the connector and attach the new bulb, which should be inserted back into the tail light socket; finally, secure the tail light to its housing with the screws.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on a Maruti Baleno?
How to Replace the Fuel Filter on a Maruti Baleno?
Maruti Baleno (2015-2023 / MK 2) To replace the fuel filter on a Maruti Baleno, lift the vehicle to access the components underneath. The fuel filter is located near the left rear wh…
How to Replace the Battery in a Maruti Baleno?
How to Replace the Battery in a Maruti Baleno?
Maruti Baleno (2015-2023 / MK 2) To replace the battery in a Maruti Baleno, open the hood of the car to access the components inside the engine compartment. On the right side of the …
How to Replace the Radio on a Maruti Baleno?
How to Replace the Radio on a Maruti Baleno?
Maruti Baleno (2015-2023 / MK 2) To replace the radio on a Maruti Baleno, pry off the panel with the hazard light button located just below the radio. Once this panel is removed, uns…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos