Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads of the Maruti Ertiga?

Model: Maruti Ertiga MK 2 - Years 2018-2025
Part: Brake pads

To replace the rear brake pads of the Maruti Ertiga, lift the car with a jack or lift so that the corresponding wheel is off the ground. Once the wheel is lifted, unscrew the bolts that secure it to the hub and remove it completely. At this point, unscrew the screws that secure the caliper so that it can be detached from the rotor, allowing access to the pads. These should be removed and replaced with new replacement parts, and then reassemble the corresponding wheel.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight on the Maruti Ertiga
How to Remove the Rear Headlight on the Maruti Ertiga
Maruti Ertiga (2018-2025 / MK 2) In this tutorial, see how to remove the rear headlight on the Maruti Ertiga to replace a faulty bulb or the entire unit. First, ensure the key is not…
How to Manually Set the Time on a Maruti Ertiga
How to Manually Set the Time on a Maruti Ertiga
Maruti Ertiga (2012-2018 / MK 1) If the instrument cluster of your first-generation Maruti Ertiga (2012-2018) displays an incorrect time and you want to change it manually, follow th…
How to Replace the Spark Plugs on a Maruti Ertiga
Maruti Ertiga (2012-2018 / MK 1) To replace the spark plugs on a Maruti Ertiga, open the hood to access the components inside the engine bay. You will need to unscrew the bolts secur…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos