Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Ertiga
    4. : How to remove the rear door panel of Maruti Ertiga Mk1.

Maruti Ertiga - Video tutorial

Model: Maruti Ertiga MK 1 - Years 2012-2018
Part: Door panel
Operation: How to remove the rear door panel of Maruti Ertiga Mk1.

The guide shows how to disassemble the rear door panel of the Maruti Ertiga Mk1. The first step is to open the small cover in the door handle compartment and remove the fixing screw. Using a plastic lever, remove the finishing panel of the handle recess and unscrew the exposed screw. Remove the window finishing piece. Starting from the bottom edge of the panel, detach the fixing clips and then lift the panel to detach it from the top edge. Remove the electrical connector of the window control.


Posted on 9 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos