Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Alto 800
    4. : How to install interior adjustable mirrors on Maruti Alto 800

Maruti Alto 800 - Video tutorial

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Outside rearview mirror
Operation: How to install interior adjustable mirrors on Maruti Alto 800

On the Maruti Alto 800 mirrors are installed to change the position to which you have to put out the classic hand. Let's see how to change them with mirrors that can be adjusted from the inside. A pair of these mirrors costs 14.88 euros in AliExpress. First we have to remove the plastic triangle on the inner side of the glass, which is easily removed as it is under pressure. Below are three screws, which we will remove. At this point the entire mirror comes off. We clean the support panel well before installing the new mirror. Just insert the mirror by letting the adjustment control enter through the hole, with its spacer. But let's first place the small yellow plastic nut. In its housing. Put the three screws that hold the mirror back in place. Now we need to place the plastic triangle, with its hole to pass the control lever. Placing it in the right position, it fits by itself. Here we need a fixing screw, which fits into the yellow plastic nut we placed at the beginning. It remains only to screw the gasket of the control arm. Now we have to repeat the work on the other side. The work is done.


Posted on 2 July 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos