Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Baleno
    4. : How to replace the Maruti Baleno horn

Maruti Baleno - Video tutorial

Model: Maruti Baleno MK 2 - Years 2015-2023
Operation: How to replace the Maruti Baleno horn

In this video tutorial we will see how to disassemble and replace the horn or horn of the Maruti Baleno, in simple and quick steps. First of all, we open the bonnet of our car by pulling the lever from the inside; we then unscrew the screws located on both sides of the wheel arches to start releasing the bumper, then remove the additional screws that we find above and below the front bumper, as illustrated in the video. Once the bumper has been removed, we can unscrew the screw of the horn bracket, disconnecting the electrical connector; replace it with the new one and put everything back together!


Posted on 4 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos