Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Maruti 800?

Model: Maruti 800 MK 1 - Years 1984-2014
Part: Air filter

As you can see in this tutorial, replacing the air filter in a Maruti 800 is an extremely simple and quick task. Before proceeding, ensure that the engine is completely cool to avoid burns. Start by opening the hood, then move to the left side of the car and unscrew the two indicated bolts. Next, loosen the clamp on the intake manifold and disconnect it along with the sensor. At this point, you can remove the airbox, open it by unlocking the clips around the perimeter, and proceed with replacing the filter.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Maruti 800
How to Replace the Air Filter on a Maruti 800
Maruti 800 (1984-2014 / MK 1) If you need to replace the engine air filter on this model and are unsure how to proceed, you will find the instructions and steps to follow in the d…
Where is the OBD port located in the Maruti 800?
Where is the OBD port located in the Maruti 800?
Maruti 800 (1984-2014 / MK 1) The OBD2 port or diagnostic socket on a Maruti 800 vehicle is located inside the cabin, specifically under the steering wheel near the fuse box. Unli…
Where are the fuses located in the Maruti 800?
Where are the fuses located in the Maruti 800?
Maruti 800 (1984-2014 / MK 1) The fuses in the Maruti 800 are located inside the fuse box installed in the vehicle: it is situated in the cabin, on the lower left side of the dash…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos