Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Sx4
    4. : How to remove the inner panel of the Maruti SX4 Mk1 door.

Maruti Sx4 - Video tutorial

Model: Maruti Sx4 MK 1 - Years 2007-2014
Part: Door panel
Operation: How to remove the inner panel of the Maruti SX4 Mk1 door.

The guide shows how to remove the interior panel of the Maruti SX4 Mk1 door. The first step is to remove the plastic finishing piece at the base of the mirror. Using a small flathead screwdriver, remove the covers of the screws located in the handle and door compartment; unscrew the exposed screws. Using a plastic lever, starting from the bottom of the door panel and working around the edge, detach the fastening clips of the piece. Disconnect the electrical connectors before removing the panel. The assembly is done in reverse order.


Posted on 9 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos