Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel of a Maserati Quattroporte

Model: Maserati Quattroporte MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Door trim panel

See other generations:
Video tutorial

Start by opening the door. Insert a thin but sturdy tool into the gap between the wood insert and its housing, releasing it from its clips and removing it from its seat.

Repeat this step for the internal handle as well. This will expose simple screws and Allen screws, both types need to be unscrewed and removed.

Next, remove the internal reflector of the door using the thin but sturdy tool. This will reveal another Allen screw, which also needs to be removed.

Behind the opening handle, there is a small rubber grommet that you need to remove to access the last Allen screw to unscrew. Before you can remove the door panel, you must unscrew the pin that secures the door.

Now, simply pull the door panel upwards. Once the panel is detached from the door, disconnect the wiring connectors before fully removing it. After completing this step, you will have successfully removed the door panel.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Maserati Quattroporte (2013-2023 / MK 6) If you need to work on the fuses of your 2020 Maserati Quattroporte but don't know where they are located, simply follow this guide and apply the des…
Maserati Quattroporte (2003-2012 / MK 5) How to change the key battery of a Maserati Quattroporte? It's a very simple operation, let's see. Press the release button of the metal key. Once th…
Maserati Quattroporte (2013-2023 / MK 6) This guide provides the necessary instructions to reset the engine oil light on the Maserati Quattroporte. First, get inside the vehicle and connect …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos