Do it yourself
Frequently asked questions about cars and motorcycles

How to Properly Use the Charging Port on the Maxus e-Deliver3 Van

Model: Maxus Maxus Various
Part: Checks and maintenance

Let's see how to properly use the charging port on the Maxus e-Deliver3 van: to open and close the charging flap, unlock the vehicle with the remote, then press the centre of the emblem located at the centre of the grille with the palm of your hand. To close and lock it, press again until you hear the "click" of the closure. The upper port is for AC charging, while the lower one is for rapid DC charging. The rubber caps overlap, so when closing, insert the lower one first and then the upper one. The cable locks automatically during charging; to remove it, simply unlock the vehicle with the remote. If the remote battery is flat, access the cabin using the physical key, open the front bonnet, and pull the emergency release cable located at the front of the compartment; this will stop the charging. If the flap is difficult to open, ensure the vehicle is unlocked; apply firm pressure to the centre of the emblem, clean and lubricate the locking pins; also check that the two rubber caps inside the flap are present; they may fall out; they are not essential but help with the sliding.

Posted on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Maxus Maxus Various In this tutorial we can see how to adjust the time in the Maxus Deliver 9 van, an extremely simple and fast operation, to be carried out for example …
Maxus Maxus Various In this video we can see where the battery of the Maxus Deliver 9 van is located, and how to use it in case of need: in vehicles with right-hand driv…
Maxus Maxus Various If you need to replace the remote key battery on this car model, you can first consult the description below for all the useful instructions for the …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos