Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the car radio from the Mazda 3

Model: Mazda 3 BL, MK 2 - Years: 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

Removing the car radio from a vehicle can become necessary when you need to check the serial number to enter the unlock code, or if the connector is not functioning correctly, or simply if you want to replace the radio with a more modern one. On a Mazda 3, removing the car radio requires just 3 steps.

The first step is to insert a plastic key into the vents to lift and remove them.

The second step is to unscrew the two upper screws that secure the radio. The third step is to pull out the radio and disconnect the connector and the antenna wire.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to Remove the Original Radio from a Mazda 3 MK1
How to Remove the Original Radio from a Mazda 3 MK1
Mazda 3 (2003-2009 / BK, MK 1) Follow these instructions to remove the original radio from a first-generation Mazda 3. First, get inside the car and remove the trim above the radio…
Complete Car Radio Disassembly
Complete Car Radio Disassembly
Mazda 3 (2009-2013 / BL, MK 2) Using a plastic tool to avoid damaging the bodywork, lever out the air vent from the dashboard and remove it from its housing. Remove the lower panel…
Removing the Radio from a Mazda 3 MK2
Removing the Radio from a Mazda 3 MK2
Mazda 3 (2009-2013 / BL, MK 2) Let's see how to remove the radio from the Mazda 3 if you want to replace it with a model that has better audio features. Using a thin lever, prefera…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos