Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : How to disassemble the original car stereo on Mazda 3 MK1

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Car stereo
Operation: How to disassemble the original car stereo on Mazda 3 MK1

Let's see how to disassemble the original car radio on a Mzda 3 first series, following the instructions below. First of all we go inside the car and we go to remove the frame that we find above the car radio, gently levering the sides; once removed we can unscrew all the fixing screws that we find below. At this point we are going to remove the original car radio, disconnecting the electrical power connector and the antenna cable that we find on the back, as shown in the video. Reverse the procedure for reassembly!


Posted on 17 January 2024 by ScegliAuto



How to replace the Mazda 3 2.3L temperature sensor
Mazda 3 (2009-2013 / MK 2, BL) Today we will see the main instructions which will allow us to disassemble and replace the temperature sensor of the Mazda 3 2.3L, by following these
Iphone, Ipod and Ipad accessory kit installation
Mazda 3 (2009-2013 / MK 2, BL) If you want to integrate an Iphone, Ipod and Ipad accessory kit to our car, it would be necessary to combine the support for Iphone, a car charger an
How to disassemble the air conditioning console in the Mazda 3?
Mazda 3 (2003-2009 / BK, MK 1) In this tutorial, we can see how to disassemble the air conditioning console in the Mazda 3, an extremely simple and quick operation. First of all, m

    Frequently Asked Questions

    • Mazda 3 2009-2013 - How do you remove the car stereo from the Mazda 3? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos