Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor in the Mazda 2?

Model: Mazda 2 DE, MK 2, DH - Years 2007-2014
Part: Starter motor

In this tutorial we can see how to replace the starter motor in the Mazda 2, an extremely simple and quick operation. Before proceeding, let's disconnect the negative terminal of the battery, so that we can work in complete safety. We start by going under the vehicle, then we locate the two fixing bolts of the starter motor and unscrew them using a 12mm socket wrench. We then remove the small bracket indicated, unscrew the power pole nuts with a 13mm wrench and separate the starter motor from the support. At this point, we can position the replacement and follow the reverse procedure.

Posted on 5 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the starter motor in the Mazda 2?
How to replace the starter motor in the Mazda 2?
Mazda 2 (2007-2014 / DE, MK 2, DH) .. In this tutorial we can see how to replace the starter motor in the Mazda 2, a simple operation but one that requires good manual.. …
How to reset the service indicator on the Mazda 2
How to reset the service indicator on the Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) If you need to manually reset the service indicator light on your Mazda 2, all you have to do is pay attention to the following steps and then put th…
Where is the OBD port of the Mazda 2?
Where is the OBD port of the Mazda 2?
Mazda 2 (2014-2023 / MK 3, DJ) If you don't know where the OBD port of your Mazda 2 is located, don't worry because thanks to the steps described in the following guide, you will b…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos