Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Mazda 6 key fob battery.

Model: Mazda 6 GJ, MK 3 - Years 2012-2024
Part: Key

Below we will see the steps that will allow us to disassemble and replace the battery of the key remote of the Mazda 6. First of all, we take our remote control and start removing the physical key from inside it; then we use a thin tool, like a flat screwdriver, to pry on the side slot, thus removing the plastic back cover. At this point we will have access to the battery compartment, thus removing the battery we find inside; let's replace it with the new one, of the right type (in this case a CR 2025); insert it in the correct way and reassemble the cover and the key of the remote control!

Posted on 16 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Mazda 6?
Mazda 6 (2012-2024 / GJ, MK 3) To replace the battery on a Mazda 6, open the bonnet to access the components inside the engine bay: the battery is located on the right side, next t…
How to Replace the Remote Battery on the Mazda 6?
How to Replace the Remote Battery on the Mazda 6?
Mazda 6 (2008-2012 / GH, MK 2) To replace the battery in the remote for the Mazda 6, slide the key out from the top of the remote and use a flathead screwdriver to open the device.…
How to Replace the Remote Battery on a Mazda 6
How to Replace the Remote Battery on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) In this tutorial, you will see how to replace the remote battery on a Mazda 6, a very simple and quick operation. To do this, you will need a small f…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos