Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure light on the Mazda 3

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part:

The following steps will explain the procedure for resetting the tire pressure warning light on the Mazda 3; before resetting the TPMS sensors, it is necessary for all four tires to be at the correct pressure. Then, we get into the car and start the engine; next, we press and hold the reset button located on the dashboard, next to the steering wheel, as shown in the video. At this point, we check the correct reset of the tire pressure warning light on the instrument panel display!

Posted on 21 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Mazda 3 (2013-2019 / MK 3, BN, BM) To manually reset the tire pressure warning light on the instrument panel of your 2016 Mazda 3, it only takes a few seconds. In fact, you simply need…
Mazda 3 (2013-2019 / MK 3, BN, BM) In order to reset the tire pressure warning light of the Mazda 3, you need to inflate the tires until they reach the corresponding pressure value: th…
Mazda 3 (2019-2026 / MK 4, BP) To make the tire pressure warning light disappear from the instrument panel of the Mazda 3, you will need to inflate the tires until they reach the o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos