Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear seat of the Mazda CX-5.

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Rear bench seat

The instructions in this guide will show us how to disassemble and remove the rear seat of the Mazda CX-5. First, let's open the rear doors of the vehicle and start unlocking the seat at the bottom, performing the operation on all three seats; then we pull the seat upwards to detach it and remove it completely from the cabin, as shown in the video. At this point, we carry out the repair or replacement of the rear seat, disassembling the backrests if necessary; we then reassemble and securely fasten the rear seat.

Posted on 30 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seat of the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Today we will see the main instructions that will allow us to disassemble and remove the rear seat of the Mazda CX-5, in simple and quick steps. Firs…
Replacing the Rear Light of the Mazda CX-5
Replacing the Rear Light of the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Briefly follow the instructions to remove and replace the rear light and all its bulbs on the Mazda CX-5. First, open the boot and start by removing …
Replacing the rear light of the Mazda CX-5
Replacing the rear light of the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Today's guide will show you how to remove and replace the rear light of the Mazda CX-5, following the instructions below. First, open the rear tailga…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos