Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuel Filler Door of the 2023 Mazda 2

Model: Mazda 2 DJ, MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Fuel cap

See other generations:
Video tutorial

To open the fuel filler door of the 2023 Mazda 2 Hybrid model, keep the central locking unlocked and lift the lever located near the left front seat to open the door. Once the fuel filler door is open, unscrew the fuel cap to refuel.

After refuelling, screw the cap back on clockwise and close the fuel filler door. When the vehicle is locked, it is impossible to open the fuel filler door from the outside without forcing it. If the door does not open despite the vehicle being unlocked, an emergency procedure will be necessary to remove the interior part of the boot.


Posted on 30 January 2026 by ScegliAuto


Related tutorials

How do you deactivate the alarm system in the Mazda 2?
How do you deactivate the alarm system in the Mazda 2?
Mazda 2 (2022-2026 / Xp210) The deactivation method of the anti-theft system of the Mazda 2 is the classic one, that is, through the use of the remote control. This can be done …
Service reset on a Mazda 2
Service reset on a Mazda 2
Mazda 2 (2014-2023 / DJ, MK 3) In this very short guide, we will see how to reset the service light using the central navigation display of a Mazda 2, third series model produced f…
How to replace the remote battery for the Mazda 2?
How to replace the remote battery for the Mazda 2?
Mazda 2 (2014-2023 / DJ, MK 3) Replacing the remote battery for the Mazda 2, as shown in this tutorial, is an extremely simple and quick operation. You will only need a replacement…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos