Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mazda CX-5 Key

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Key

Let’s see how to replace the battery in a Mazda CX-5 key. Take the remote: extract the key blade, then use a screwdriver to pry between the two covers of the key (separate the covers as shown in the video). Pry until the covers separate, then remove the worn battery with a small screwdriver; take and replace it with a new one (of the same size and voltage). Press the key case until you hear the locking click. Finally, join the two covers and check the correct operation of the remote by pressing the buttons.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the CX 5 key.
How to replace the battery of the CX 5 key.
Mazda CX-5 (2017-2024 / MK 2) .. for replacing the battery of the Mazda CX 5 key is shown. This procedure is very simple and quick to perform, first you need to pry with your fingers.. …
How to Replace the Key Battery of the Mazda CX-5
How to Replace the Key Battery of the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) In this mini guide, discover how to replace the battery of your Mazda CX-5 MK1 key (2012-2017). First, press the small button on the back cover while…
Replacement of the battery of the key remote of the Mazda CX-5.
Replacement of the battery of the key remote of the Mazda CX-5.
Mazda CX-5 (2017-2024 / MK 2) Following these brief and simple steps, we will see how to disassemble and replace the battery of the key remote for the Mazda CX-5. First, take the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos