Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Remote Key Battery

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Key

See other generations:
Video tutorial

Press the button to open the metal key (commonly referred to as the 'blade'): inside the blade slot, there is a tab that must be pressed to separate the key holder from the remote. At this point, pry between the shells of the remote to separate them: one houses the circuit board and the other the battery; extract the old battery, clean the battery compartment and tab of any oxide residues, and insert the new battery, ensuring correct polarity.

Close the remote shells and reattach them to the key holder.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on the Mazda 6?
How to Replace the Remote Battery on the Mazda 6?
Mazda 6 (2008-2012 / MK 2, GH) To replace the battery in the remote for the Mazda 6, slide the key out from the top of the remote and use a flathead screwdriver to open the device.…
Replacement of the Mazda 6 key fob battery.
Replacement of the Mazda 6 key fob battery.
Mazda 6 (2012-2024 / GJ, MK 3) Below we will see the steps that will allow us to disassemble and replace the battery of the key remote of the Mazda 6. First of all, we take our rem…
How to Replace the Remote Battery on a Mazda 6
How to Replace the Remote Battery on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) In this tutorial, you will see how to replace the remote battery on a Mazda 6, a very simple and quick operation. To do this, you will need a small f…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos