Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Power Steering Oil

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Power steering fluid

The materials needed for the job include special oil, some tools, and a syringe. Open the reservoir cap. Remove the right front wheel arch liner to access the bottom of the reservoir. Place a container under the engine to collect the oil and a plastic sheet. Unscrew the oil cap on the reservoir pipe and let it drain completely. Close the cap and fill the reservoir with new oil. Start the engine and top up the oil to the max mark. Do not dispose of used oil in the environment; take it to the appropriate collection centres.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Cabin Air Filter Replacement
Cabin Air Filter Replacement
Mazda 3 (2009-2013 / MK 2, BL) It is very important to change the cabin air filter as it protects us from external agents and allows the car's ventilation duct to breathe better. I…
How to replace the headlight bulb of the 2022 Mazda 3.
How to replace the headlight bulb of the 2022 Mazda 3.
Mazda 3 (2019-2026 / MK 4, BP) The steps for replacing the headlight bulb of the 2022 Mazda 3 are as follows: - open the front hood by pressing the lever located under the steering…
Replacement of the Fog Light Bulb
Replacement of the Fog Light Bulb
Mazda 3 (2003-2009 / BK, MK 1) To carry out this replacement, you will need to work from underneath the car. You must remove the panel beneath the engine to access the rear of the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos