Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Reservoir in the Mazda 3?

Model: Mazda 3 BL, MK 2 - Years: 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the windscreen washer reservoir in the Mazda 3, a very simple task. Temporarily disconnect the upper end of the power steering reservoir, then lift the front right of the vehicle and remove both the wheel and the inner wheel arch cover.

Next, remove the bolt from the right side of the bumper, unclip it from the frame, and proceed to disconnect the pump, the various hoses, and remove the bolts securing the reservoir. At this point, you can separate it from the support and fit the replacement by following the reverse procedure.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Check the Windscreen Washer Fluid on a Mazda 3
How to Check the Windscreen Washer Fluid on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) This guide will show you how to check the level of the windscreen washer fluid. First, enter the cabin and pull the bonnet release lever located at t…
Power Steering Fluid Replacement
Power Steering Fluid Replacement
Mazda 3 (2003-2009 / BK, MK 1) Regular maintenance on your car will significantly extend its life. In this tutorial, you will see where to work to carry out these tasks. Open and l…
What Warning Lights are on the Mazda 3 Dashboard?
What Warning Lights are on the Mazda 3 Dashboard?
Mazda 3 (2013-2019 / BM, BN, MK 3) The Mazda 3, like many vehicles, has a system of warning lights that keep you informed about what is happening in your vehicle while you are driving.…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos