Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Power Steering Fluid Replacement

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Checks and maintenance

Regular maintenance on your car will significantly extend its life. In this tutorial, you will see where to work to carry out these tasks. Open and lift the bonnet and locate the position of the small power steering fluid reservoir; it is located under the larger reservoir on the left side of the bonnet next to the windscreen washer fluid reservoir. Now you can unscrew the cap, and after checking the minimum and maximum levels, add the necessary fluid to keep it within limits. Finally, replace the cap, close the bonnet, and start the vehicle to circulate the fluid.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windscreen Washer Reservoir in the Mazda 3?
How to Replace the Windscreen Washer Reservoir in the Mazda 3?
Mazda 3 (2009-2013 / MK 2, BL) In this tutorial, you will learn how to replace the windscreen washer reservoir in the Mazda 3, a very simple task. Temporarily disconnect the upper …
Replacement of Power Steering Oil
Replacement of Power Steering Oil
Mazda 3 (2003-2009 / BK, MK 1) The materials needed for the job include special oil, some tools, and a syringe. Open the reservoir cap. Remove the right front wheel arch liner to a…
Engine Coolant Replacement
Engine Coolant Replacement
Mazda 3 (2003-2009 / BK, MK 1) Lift the vehicle and secure it. Before proceeding, open the radiator cap. Remove the plastic cap located under the radiator using the special tool, t…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos