Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Maintain the Automatic Gearbox on the Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Transmission fluid

See other generations:
Video tutorial

In today's tutorial video, you will learn how to maintain the automatic gearbox on the first series Mazda CX-5 by following these simple steps. First, lift the vehicle and start by removing the lower plastic cover; then, unscrew the oil drain bolt using a Torx spanner, allowing it to drain into a container for about ten minutes.

At this point, remove the oil sump to clean it and replace the gasket; finally, pour the new gearbox oil through the hole found in the engine bay, as shown in the video!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How do you activate the I-Stop system in the Mazda CX 5?
How do you activate the I-Stop system in the Mazda CX 5?
Mazda CX-5 (2012-2017 / MK 1, KE) The I-Stop system by Mazda is nothing more than the so-called Start and Stop present in almost all recent cars. The purpose is well known, namely to …
How to put a Mazda Skyactive gearbox into learning mode
How to put a Mazda Skyactive gearbox into learning mode
Mazda CX-5 (2017-2024 / MK 2) Let's see how to put a Mazda Skyactive gearbox in learning mode: this procedure deletes all the adaptation values learned by the automatic gearbox, r…
How do you reset the service light in the Mazda CX 5?
How do you reset the service light in the Mazda CX 5?
Mazda CX-5 (2017-2024 / MK 2) We have reached the expected mileage and need to service our Mazda CX 5? If we prefer to do the work ourselves, such as changing the engine oil, filt…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos