Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Mazda Biante?

Model: Mazda Biante MK 1 - Years 2008-2018
Part: Brake pads

To replace the front brake pads on a Mazda Biante, lift the car with a jack so that the corresponding wheel can be completely removed. This can be done after loosening the securing bolts; once the wheel is removed, you will have access to the components behind it. Detach the brake caliper from the brake rotor by unscrewing its securing bolts: then, the pads inside can be removed and replaced with new replacement parts. After the replacement, reinstall the brake caliper and the corresponding wheel.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Brake Pads on a Mazda Biante
How to Change the Brake Pads on a Mazda Biante
Mazda Biante (2008-2018 / MK 1) Let's see how to replace the rear brakes on a Mazda Biante. First, remove the two rear wheels and securely lift the vehicle with a jack. Do not rely …
Where to Find the OBD Port on the Mazda Biante
Where to Find the OBD Port on the Mazda Biante
Mazda Biante (2008-2018 / MK 1) If you still can't find the OBD port on your Mazda Biante after several attempts, don't worry. Just follow these instructions to clear up any doubts.…
How to Replace the Throttle Body on a Mazda Biante?
How to Replace the Throttle Body on a Mazda Biante?
Mazda Biante (2008-2018 / MK 1) To replace the throttle body on a Mazda Biante, open the hood to access the components inside the engine compartment. Remove the air filter box compl…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos