Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Brake Pads on a Mazda Biante

Model: Mazda Biante MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

Video tutorial

Let's see how to replace the rear brakes on a Mazda Biante. First, remove the two rear wheels and securely lift the vehicle with a jack.

Do not rely solely on the jack, and place the two removed wheels under the vehicle for safety. Open the hood and remove the brake fluid reservoir cap. Then, using a screwdriver, remove the caliper by unscrewing the front and rear bolts: take out the pads and replace them with new ones.

Reinstall the caliper, checking the functionality of the piston. Tighten everything well, also replacing the retaining clip.

You can now remount the wheels. Job complete.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Mazda Biante?
How to Replace the Front Brake Pads on a Mazda Biante?
Mazda Biante (2008-2018 / MK 1) To replace the front brake pads on a Mazda Biante, lift the car with a jack so that the corresponding wheel can be completely removed. This can be do…
Where to Find the OBD Port on the Mazda Biante
Where to Find the OBD Port on the Mazda Biante
Mazda Biante (2008-2018 / MK 1) If you still can't find the OBD port on your Mazda Biante after several attempts, don't worry. Just follow these instructions to clear up any doubts.…
How to Open the Manual Ignition Key on Mazda Biante
Mazda Biante (2008-2018 / MK 1) If the Mazda Biante won't start with the electronic key, you can start it with the physical key. Like many European vehicles that can be opened with …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos