Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Brake Rotors and Pads on the Mazda CX-9

Model: Mazda Cx 9 TB - Years 2007-2015
Part: Brake rotors

Today, you will learn how to remove and replace the front brake pads on the Mazda CX-9 by following these simple steps. First, raise the vehicle and remove the front wheel; then, unscrew the bolts securing the front brake caliper, removing it from the rotor as shown in the video. Next, unscrew the bolts from the brake rotor, replacing it with the new one; then, remove the old pads and clean the brake caliper from dirt by pressing the piston to retract it. Securely attach the brake rotor and reinstall the caliper with the new pads!

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Mazda CX-9?
How to Replace the Front Brake Pads on a Mazda CX-9?
Mazda Cx 9 (2016-2024 / TC) To replace the front brake pads on a Mazda CX-9, lift the vehicle with a jack or lift so that the corresponding wheel is off the ground. Once the whe…
How to Replace the Front Brake Pads on a Mazda CX-9?
How to Replace the Front Brake Pads on a Mazda CX-9?
Mazda Cx 9 (2007-2015 / TB) To replace the front brake pads on a Mazda CX-9, lift the vehicle so you can remove the bolts securing the wheel corresponding to the pads being repl…
How to Enter Maintenance Mode on a Mazda with Electronic Parking Brake
How to Enter Maintenance Mode on a Mazda with Electronic Parking Brake
Mazda Cx 9 (2016-2024 / TC) Let's see how to engage the parking brake on a Mazda CX-9 (but it works for most Mazda models). Turn on the ignition, wait for the parking brake ligh…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos