Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS on a Mazda CX-5?

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Tire pressure warning light

If you notice the low tyre pressure warning light on your vehicle while driving, check the actual tyre inflation pressure and restore it to the manufacturer's recommended level. After doing this, you will need to clear the warning on the dashboard. To do this, sit in the driver's seat and locate the tyre pressure set button on the left side of the dashboard at the bottom. Press and hold this button for three seconds, after which the low pressure warning light will turn off.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the Mazda CX-5?
How to reset the tire pressure light in the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In this tutorial we can see how to reset the tire pressure light in the Mazda CX-5, an extremely simple and quick operation, to be performed only onc…
How to reset the tire pressure light in the Mazda CX-5?
How to reset the tire pressure light in the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In this tutorial, we can see how to reset the tire pressure light in the Mazda CX-5, a very simple and quick operation, to be done only once the corr…
How to reset the tire pressure light in the Mazda CX-5?
How to reset the tire pressure light in the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In this tutorial we can see how to reset the tire pressure light in the Mazda CX-5, an extremely simple and quick operation, to be done only once the…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos