Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning on the Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part:

Today's main steps will allow us to reset the tire pressure warning of the Mazda CX-5; before resetting the TPMS sensors, it is necessary that all four tires are at the correct pressure, following the values indicated on the label on the driver's side body pillar. Then we get into the car and turn on the instrument panel; now we press and hold the TPMS reset button located on the side of the dashboard, next to the steering wheel, until the tire pressure warning is completely reset!

Posted on 10 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tire pressure warning on the Mazda CX-5.
Resetting the tire pressure warning on the Mazda CX-5.
Mazda CX-5 (2012-2017 / MK 1, KE) .. procedure outlined in this guide will show us how to reset the tire pressure warning on the Mazda CX-5; before resetting the TPMS sensors, it is necessary.. …
Resetting the tire pressure warning light on the Mazda CX-5
Resetting the tire pressure warning light on the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Today we will discover the information that will show us how to reset the tire pressure warning of the Mazda CX-5; before resetting the TPMS sensors,…
Instructions to Reset Tyre Pressure Light on Mazda CX-5
Instructions to Reset Tyre Pressure Light on Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) In today's video tutorial, you will see the instructions to reset the tyre pressure light on a Mazda CX-5. Before performing this operation, ensure t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos