Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Battery for the Mazda 3

Model: Mazda 3 BM, BN, MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

Here are the step-by-step instructions to disassemble and replace the battery of the remote key for the Mazda 3. First, take your remote and remove the physical key from inside it; then, use the gap created to pry off the plastic rear cover, removing the battery found inside, as shown in the video.

At this point, install the suitable battery (in this case, a CR 2025 3V), inserting it in the correct orientation in the remote; finally, reattach the plastic cover and the physical key.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Mazda 3
How to Replace the Key Battery on a Mazda 3
Mazda 3 (2013-2019 / BM, BN, MK 3) After several years of use, it may happen that the key for your 2019 Mazda 3 no longer works due to a completely dead battery. Fortunately, replacing…
How to Replace the Remote Key Battery on the Mazda 3?
How to Replace the Remote Key Battery on the Mazda 3?
Mazda 3 (2019-2026 / MK 4, BP) Replacing the battery in the Mazda 3 remote key, as shown in this tutorial, is an extremely simple and quick operation. To do this, you will need a s…
Replacing the Remote Battery of a Mazda 3
Replacing the Remote Battery of a Mazda 3
Mazda 3 (2013-2019 / BM, BN, MK 3) In this guide, replace the remote battery of a Mazda 3. When you can no longer unlock your car, you need to change the battery inside the key fob. Ta…

    Frequently Asked Questions

    • Mazda 3 2019-2026 - What does the wrench light on the Mazda 3 indicate? Read answer
    • Mazda 3 2009-2013 - What does the wrench light on the Mazda 3 dashboard mean? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos