Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Number Plate Light Fuse in the Mazda CX-7?

Model: Mazda Cx7 MK 1 - Years 2006-2012
Part: License plate light

If the number plate light on the Mazda CX-7 suddenly stops working, first check the status of the respective fuse, the location of which is indicated in this video. As shown, it is located in the box inside the engine compartment, protected by the black cover next to the battery, and it is the first one in the third lower column. Its amperage is 20A. If faulty, ensure you replace it with a spare of the same specifications and always work with the vehicle switched off to avoid damaging any connected devices.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the lambda sensors located on a Mazda CX-7?
Where are the lambda sensors located on a Mazda CX-7?
Mazda Cx7 (2006-2012 / MK 1) In this video, you can see where the lambda sensors are located on a Mazda CX-7 and how to proceed if you need to replace them. These sensors are ver…
How to Reset the DPF Warning Light on the Mazda CX7?
How to Reset the DPF Warning Light on the Mazda CX7?
Mazda Cx7 (2006-2012 / MK 1) To reset the DPF warning light on the Mazda CX7, turn off the ignition and connect a wire from the upper terminal of the connector to a grounding poi…
Resetting the TCS System on the Mazda CX7
Resetting the TCS System on the Mazda CX7
Mazda Cx7 (2006-2012 / MK 1) In this video, we see that if there is a power interruption on the Mazda CX7, for example, following a battery replacement, the TCS system light may …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos