Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 6
    4. : Car shock absorber replacement

Mazda 6 - Video tutorial

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Shock absorbers
Operation: Car shock absorber replacement

The shock absorbers have the task of slowing down the suspension movements. If the car has traveled many kilometers, they must be replaced. You can easily find them in an auto parts shop. The replacement work is quite complex but can still be done on your own, so you don't go to the mechanic and save money. The guide shows how to replace them. It is necessary to have a compressor, or, alternatively, it is possible to use a pneumatic gun, a spring tensioner and finally a jack. Once all the bolts have been unscrewed, the wheel can be removed. Next it is necessary to open the hood and remove all the screws that you will find above the shock absorber support. Then it is also necessary to remove the two screws located on the spindle and the one positioned on the stabilizer, which runs parallel to the "affected" shock absorber. The shock will go away so easily.


Posted on 6 September 2023 by ScegliAuto



Rear shock absorber replacement
Mazda 6 (2002-2008 / GG, MK 1) The shock absorbers change when they no longer perform their function regardless of the mileage traveled. It is advisable to replace all four at the
Front suspension replacement on Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) We replace the damaged shock absorber in the front of a Mazda 6. We lift the car onto a column bridge and take the wheel out. We spray the shock abso
How to remove Mazda 6 car shock absorbers
Mazda 6 (2002-2008 / GG, MK 1) This video shows us how to remove a Mazda front shock absorber. Let's see carefully how to do it. The first step to perform: we loosen the pins of th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos