Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : How to replace the fuse of the Mazda 3 car radio.

Mazda 3 - Video tutorial

Model: Mazda 3 BL, MK 2 - Years 2009-2013
Part: Fuse box
Operation: How to replace the fuse of the Mazda 3 car radio.

When our radio suddenly stops working without any warning, the cause is almost always a blown fuse. To fix the problem, all we need to do is replace it. Today, we will explain how to replace the fuse of a Mazda 3 car radio. The first thing to do is to open the fuse box located inside the cabin, under the passenger side glove compartment. Once opened, we need to use the appropriate pliers to remove the 7.5 Amp fuse number 44. After removing it, we should insert a fuse with the same amperage in its place and then close the box. By doing this, the radio will start working again.


Posted on 18 October 2023 by ScegliAuto



Removal of the radio from the Mazda 3 MK2
Mazda 3 (2009-2013 / BL, MK 2) Let's see how to proceed to disassemble the radio of the Mazda 3, in case we want to replace it with a model with better audio characteristics. Using
What is the fuse diagram for the Mazda 3?
Mazda 3 (2013-2019 / BN, BM, MK 3) In this video, we can see the fuse diagrams of the Mazda 3 and the location of the various fuse boxes, which can be useful in case we need to check t
Fuse box location on Mazda 3.
Mazda 3 (2009-2013 / BL, MK 2) On this model of car from the Japanese manufacturer, the fuses are collected in two boxes which are positioned - the first in the engine compartment

    Frequently Asked Questions

    • Mazda 3 2003-2009 - How to access fuse box on Mazda 3? Read Answer
    • Mazda 3 2003-2009 - Where are the Mazda 3 fuses located? Read Answer

How to reset the Renault Master AdBlue warning light

If when you turn on the ignition you see a strange warning relating to AdBlue, do not worry because it is nothing serious. Everything is solved in a few minutes and with a very low cost. In fact, it is a particular additive used in Diesel engines to reduce the environmental impact. Before continuing with the various steps it is therefore necessary to purchase a tank of AdBlue. Furthermore, all the various operations must be carried out with the engine off. The AdBlue tank is located on the passenger side, between the door and the tailgate. Unscrew the blue cap present and pour in the new AdBlue with the help of a rubber hose or an appropriate funnel. Once this is done, you can close the tank and the flap. Switch on the ignition again and the warning light has disappeared.

Watch the video!


by ScegliAuto

More videos