Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the tyre pressure on a Mazda 3

Model: Mazda 3 BM, BN, MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

Resetting the tyre pressure on a third-generation Mazda 3 (2013-2019) is a very simple and quick operation, as shown in today's video tutorial. To perform it, simply turn on the instrument cluster without starting the engine and press the reset button located on the switch panel to the left of the steering wheel, holding it for a few seconds until an audible signal indicates that the reset is complete.

Before performing this operation, ensure that all four tyres are at the correct pressure.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on the MAZDA 3
How to Reset the TPMS Light on the MAZDA 3
Mazda 3 (2013-2019 / BM, BN, MK 3) When the TPMS light comes on in the MAZDA 3, you need to check the pressure of all four tyres. After adjusting the pressure as necessary according to…
How do you reset the TPMS system in the Mazda 3?
How do you reset the TPMS system in the Mazda 3?
Mazda 3 (2019-2026 / MK 4, BP) The Mazda 3, like many other cars, is equipped with tire pressure monitoring sensors located in the wheels. A puncture or a simple deflated tire is i…
How to Reset the Tyre Pressure on a Mazda 3
How to Reset the Tyre Pressure on a Mazda 3
Mazda 3 (2013-2019 / BM, BN, MK 3) To reset the tyre pressure on a Mazda 3, start by adjusting the tyre pressures to the values indicated by the manufacturer (see the label on the door…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos