Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. CX-5
  6. : How to reset the tire pressure warning light on the Mazda CX 5.

Mazda CX-5 - Video tutorial

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Instrument cluster
Operation: How to reset the tire pressure warning light on the Mazda CX 5.

If the orange tire light on the instrument panel of your first-generation Mazda CX 5 (2012-2017) turns on and you are sure that there is no pressure loss or puncture, then you just need to follow these steps to manually reset it. First, insert the key and turn on the car's ignition. Immediately after, locate the buttons to the right of the steering wheel and hold down the "Set" button for a few seconds. As soon as the light in question turns off, release the "Set" button and the reset is successfully completed.


Posted on 21 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Cx 5 2012-2017 - How to reset tires on a Mazda CX5? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos