Do it yourself
| ||||
|
Mazda 2 - Video tutorial
Model: Mazda 2
DJ, MK 3
- Years 2014-2023 In order to reset the tire pressure warning light of the Mazda 2, you need to inflate the tires until they reach the correct pressure value: this value is indicated on the sticker that is attached to the driver's side door pillar. Once the tires have been inflated, you can turn on the instrument panel by inserting the key into the ignition switch: when the panel is turned on, you will need to press the button located to the left of the steering wheel to make the pressure warning light disappear from the instrument panel.
Posted on 26 February 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.047
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |