Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Tyre Pressure Reset on Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

Resetting the tyre pressure on a Mazda CX-5, first generation model produced from 2012 to 2017, is a very simple and quick operation. As shown in today's video, you can do it independently after ensuring that all four tyres are inflated to the correct pressure as indicated by the manufacturer.

First, turn on the vehicle's instrument panel without starting the engine, then press and hold the reset button located on the control panel to the left of the steering wheel for a few seconds until the warning light disappears.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) When a tyre (or more than one) has a pressure that is too low compared to the standard, whether due to a puncture or simply being deflated, the tyre …
How to Reset the Tyre Warning Light on a Mazda CX-5
How to Reset the Tyre Warning Light on a Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) To completely reset the tyre pressure warning light on your Mazda CX-5, the procedure is very simple and quick. Using the car's screen, access the se…
Checking and Storing Tyre Pressure on a Mazda CX5
Checking and Storing Tyre Pressure on a Mazda CX5
Mazda CX-5 (2017-2024 / MK 2) In this guide, learn how to check and store the tyre pressure on your Mazda CX5. First, check the correct pressure on the label located on the driver…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos