Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag from a Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Airbag

See other generations:
Video tutorial

Removing the airbag from the steering wheel of a Mercedes C-Class model W204 is a simple and quick task that you can do yourself, thanks to our short video tutorial. To remove it, insert a Torx wrench into the side holes to push the internal lever of the central body and then remove the system.

Disconnect the connector and then take out the airbag. After this step, you can proceed with removing the steering wheel if necessary or replacing the airbag itself.

Reinstallation follows the reverse procedure.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to Remove the Airbag from the Steering Wheel of a Mercedes C-Class?
How to Remove the Airbag from the Steering Wheel of a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. airbag from the steering wheel of a Mercedes C-Class, loosen the two screws located at the back of the steering wheel using the appropriate hex wrench... …
How to Replace the Ignition Switch on a Mercedes-Benz C-Class?
How to Replace the Ignition Switch on a Mercedes-Benz C-Class?
Mercedes Classe C (2007-2013 / W204) .. remove the ignition switch on a Mercedes-Benz C-Class, loosen the screws located at the back of the device. This will allow you to extract the airbag.. …
How to Remove the Steering Wheel Airbag from a Mercedes C-Class?
How to Remove the Steering Wheel Airbag from a Mercedes C-Class?
Mercedes Classe C (2000-2007 / W203) .. the steering wheel airbag from a Mercedes C-Class, loosen the screws that secure the airbag to its housing: these screws are located at the back.. …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos