Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Gla
    4. : How to replace the front bumper on your Mercedes GLA-Class

Mercedes Gla - Video tutorial

Model: Mercedes Gla W156, MK 1 - Years 2013-2019
Part: Front bumper
Operation: How to replace the front bumper on your Mercedes GLA-Class

Do you want to replace the front bumper of your Mercedes GLA-Class? Let's see how to proceed in this video. We open the engine compartment and disconnect the battery terminals, lift the car with a column bridge and secure it. With a cordless screwdriver or screwdriver we unscrew the locking pins of the engine guard located in the lower part of the bumper. Once the aforementioned piece has been removed, remove the stone guard pins with a screwdriver and finally remove the pins located around the perimeter of the bumper. We remove the bumper from the car body by hand. To proceed with the assembly, let's fix the bumper on the car body with our hands and proceed to tighten all the screws both around the stone guard and around its perimeter.


Posted on 7 October 2023 by ScegliAuto

This video is currently unavailable


How to remove the rear lights of the Mercedes GLA Class.
Mercedes Gla (2013-2019 / W156, MK 1) .. to remove the rear lights of the Mercedes GLA Class: first, we need to remove the storage compartment near the light that we want to disassemble, where..
Removing the rear bumper Mercedes GLA W156
Mercedes Gla (2013-2019 / W156, MK 1) We see in this video the instructions to be able to remove the rear bumper on a Mercedes GLA first series. First of all, we open the boot lid and uns
How to remove the front brake pads of a Mercedes GLA
Mercedes Gla (2013-2019 / W156, MK 1) Before we can begin, we will have to lift the front of our Mercedes GLA. So let's start by disassembling and removing the left front wheel, unscrewin

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos