Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to remove the wiper motor on Mercedes Classe C230

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Windscreen wipers
Operation: How to remove the wiper motor on Mercedes Classe C230

Our windshield wipers no longer work? Let's see in this video how to proceed with the disassembly of the same on Mercedes C230 Class: pull the plastic lever located at the bottom left of the dashboard, lift the bonnet and put it in safety. We remove the grille placed under the windshield, then, with a socket wrench, we disassemble the arms of the wiper blades. We remove the plastic cover with special locking screws, disconnect the battery terminals and remove the wiper motor. We replace the piece we disassembled with a new original one. Let's reassemble everything by proceeding backwards.


Posted on 23 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2014-2021 - What to do when the windshield wiper of the Mercedes C-Class is not working? Read Answer
    • Classe C 2014-2021 - What is the windshield fuse on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos