Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Mercedes SLK box located?

Model: Mercedes Slk MK 2, R171 - Years 2004-2011
Part: Fuse box

The Mercedes SLK produced from 2004 to 2011 has two large fuse boxes inside. When replacing a fuse, it is important to disconnect the vehicle's battery to avoid a short circuit. The first fuse box is located inside the passenger compartment, specifically behind the driver's side dashboard. The second fuse box is located inside the front hood, specifically between the battery and the engine. To facilitate the replacement of one or more fuses, we must check the inside of the covers of both fuse boxes, where the amperage, location, and designation of each fuse inside the box are indicated.

Posted on 29 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Mercedes SLK 200 located?
Where is the fuse box of the Mercedes SLK 200 located?
Mercedes Slk (2011-2016 / MK 3, R172) In the following guide dedicated to all of you owners of a 2012 Mercedes SLK 200, we will discover where the fuse box is located and how to access it…
Where is the OBD2 Port on the Mercedes SLK 2?
Where is the OBD2 Port on the Mercedes SLK 2?
Mercedes Slk (2004-2011 / MK 2, R171) If you do not know where the OBD2 port is located on your second generation Mercedes SLK, do not worry as this guide describes all the steps you need…
Where Are the Fuses on a Mercedes SLK?
Mercedes Slk (2011-2016 / MK 3, R172) The fuses on a Mercedes SLK are located in dedicated fuse boxes installed in the vehicle. This model has two fuse boxes. The first is situated on the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos