Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Pulley on a Mercedes E-Class

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Checks and maintenance

How to remove the pulley on a Mercedes E-Class? Lift the hood and secure it. Then, use a screwdriver to remove the locking pins from the ventilation pipe (if necessary) and take off the engine soundproofing panel. Start removing the belts and unscrew the pulley tensioning bolts (as shown in the video). Once the part is detached from its seat, install the new part using the appropriate wrench; position the belts for the correct operation of the removed parts. Reassemble all previously removed parts and finally test their proper functioning.

Updated on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Poly V Belt on a Mercedes E-Class
Replacing the Poly V Belt on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Today, replace the Poly V belt, a longitudinally ribbed drive belt with high resistance to friction. Open the hood. Remove the bolts securing the bla…
Replacement of the air conditioning compressor pulley of the Mercedes E-Class
Replacement of the air conditioning compressor pulley of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. conditioning compressor pulley of the Mercedes E-Class. First, it is necessary to disassemble the air conditioning compressor, disconnecting the service.. …
How do you replace the camshaft sensor on a Mercedes E-Class?
How do you replace the camshaft sensor on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. to replace the camshaft sensor of the Mercedes E-Class by opening the hood to access the internal components of the engine compartment. Here, you can.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos