|
Do it yourself
| |||
| ||||
How to change the candles on a Mercedes Class B W245
Model: Mercedes Classe B
W245, MK 1
- Years 2005-2011
Let's see how to change the spark plugs on a Mercedes Class B W245: it is advisable to always disconnect the negative pole of the battery before carrying out this type of work on our car: we open the hood, remove the engine cover and gently disconnect the connector from each coil, then remove them: if they have a safety screw, unscrew it and then pull it out of its well. If we remove them all together, we mark the order in which we removed them. Clean the area around the spark plug well, being very careful that nothing falls inside the well, then with the ratchet wrench and the key, hook the spark plug and unscrew it counterclockwise, then pull it out. Apply a little anti-seize lubricant on the threads of the new spark plug, manually insert it into the well and then tighten it to 25 Nm; repeat for all the other spark plugs, put back the coils, then the electrical connectors, put the engine cover back in place and reconnect the battery.
Posted on 21 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Classe B
(2005-2011 /
W245, MK 1)
In today's video, you will see how to replace the glow plugs in the first series of the Mercedes-Benz B-Class, specifically the W 245. First, lift th…
Mercedes Classe B
(2005-2011 /
W245, MK 1)
To replace the spark plugs on a Mercedes B-Class, lift the car to gain access to the underside of the engine bay. From this point, disconnect all the…
Mercedes Classe B
(2005-2011 /
W245, MK 1)
Removing the spark plugs from a Mercedes B-Class? Remove the spark plugs from inside the engine compartment. Lift the front bonnet and secure it, the…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.447
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |