Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spark Plugs on a Mercedes B-Class

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Spark plugs

See other generations:
Video tutorial

Removing the spark plugs from a Mercedes B-Class? Remove the spark plugs from inside the engine compartment. Lift the front bonnet and secure it, then disconnect the battery terminals.

Remove the soundproofing panel covering the engine if access is difficult. Remove the coils from the cylinder head or the side; then unscrew the spark plugs with a socket spanner and pull them out of the cylinder head.

Take the new spark plugs and guide them with the extension of the socket spanner into the cylinder head, tighten them, and connect the power coils to each spark plug with new leads. Test their correct operation.

Close the engine compartment after maintenance.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Replace the Glow Plugs on the Mercedes-Benz B-Class
How to Replace the Glow Plugs on the Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. plugs in the first series of the Mercedes-Benz B-Class, specifically the W 245. First, lift the vehicle on a ramp to gain access. Locate the glow plug.. …
How to replace the spark plugs on a Mercedes B-Class?
How to replace the spark plugs on a Mercedes B-Class?
Mercedes Classe B (2005-2011 / MK 1, W245) .. To replace the spark plugs on a Mercedes B-Class, lift the car to gain access to the underside of the engine bay. From this point, disconnect all.. …
How to Replace Glow Plugs on Mercedes B-Class
How to Replace Glow Plugs on Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. Replacing the glow plugs on a Mercedes B-Class, here's how to remove them. Pull the engine compartment release lever located at the bottom left.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos