Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Mercedes CLK 200

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Door trim panel

See other generations:
Video tutorial

Start the operation of removing the door panel of the Mercedes CLK by removing the small cover located halfway up, slightly to the left (as shown in the video), using a small plastic pry tool. Now, unscrew the three screws found on the side of the door, near the hinge, with an appropriate screwdriver, and remove the plate.

Unscrew the screw near the lock and remove it. Unscrew the screw corresponding to the airbag in the cover previously removed. To unscrew the screws on the handle, first remove the cover by pulling it upwards and extracting it, then unscrew the screws.

Finally, use the plastic pry tool to unclip the panel along the perimeter, starting from the side near the lock to the hinge area, passing through the bottom. At this point, pull the panel outwards and simultaneously upwards.

Disconnect the cable for the lock opening via the internal handle and you’re done!


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of the Mercedes CLK
How to Remove the Front Door Panel of the Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) Today’s steps will show you how to remove the front door panel of the Mercedes CLK. First, open the front door of the vehicle and start by removing t…
How to Remove the Instrument Cluster on Mercedes CLK 200
How to Remove the Instrument Cluster on Mercedes CLK 200
Mercedes Clk (1997-2003 / A208, C208, W208) How do you remove the instrument cluster on a Mercedes CLK 200? Follow these steps for proper disassembly: Remove the plastic trim around the instrum…
How to Remove the Door Panel on a Mercedes CLK
How to Remove the Door Panel on a Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) Learn how to remove the door panel (front left) on a Mercedes CLK. Disconnect the battery terminals located in the engine bay; using a screwdriver, u…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos