Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel Airbag on a Clk

Model: Mercedes Clk A209, C209, W209 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Airbag

See other generations:
This video is currently unavailable

Do you want to remove the steering wheel airbag on a Mercedes Clk? Here’s how to detach the airbag from the steering wheel of the Clk. Disconnect the battery terminals located in the engine bay. Remove the inspection caps at the back of the steering wheel (if present), then unscrew the securing screws found in the steering wheel (where the airbag is located) using a socket or screwdriver.

Once the airbag is released (driver's side), disconnect the power connectors and remove it from the steering wheel.

Install the new airbag on the steering wheel: connect the power connectors, then press it onto the steering wheel and screw in the screws.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Replacing the Spiral Contact / Steering Angle Sensor of the Mercedes CLK W209
Replacing the Spiral Contact / Steering Angle Sensor of the Mercedes CLK W209
Mercedes Clk (2002-2010 / A209, C209, W209) In this video tutorial, you will learn how to dismantle and replace the spiral contact or steering angle sensor of the Mercedes CLK W209, second seri…
Instructions for using the passenger airbag of the Mercedes CLK
Instructions for using the passenger airbag of the Mercedes CLK
Mercedes Clk (1997-2003 / A208, C208, W208) In this short guide, we will see the instructions regarding the use of the front passenger airbag on the Mercedes CLK, but in general on most models …
How to Replace the Power Steering Fluid in a Mercedes CLK
How to Replace the Power Steering Fluid in a Mercedes CLK
Mercedes Clk (1997-2003 / A208, C208, W208) To replace the power steering fluid in a Mercedes CLK, open the bonnet to locate the reservoir containing the power steering fluid: next to it, there…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos