Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Automatic Transmission in a Mercedes GLE?

Model: Mercedes Gle C292 - Years 2015-2019
Part: Transmission

In this tutorial, you will see how to reset the automatic transmission in a Mercedes GLE, a very simple and quick operation to perform, for example, as a troubleshooting step or after a change of ownership. First, enter the cabin and insert the key, leaving it in the initial position. Next, fully press the accelerator pedal, turn on the instrument cluster simultaneously, and hold the pedal in position for at least 15 seconds. At this point, simply turn off the ignition, wait a couple of minutes, and drive a few miles using your desired driving style.

Posted on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to use the automatic gearbox on the Mercedes GLE
How to use the automatic gearbox on the Mercedes GLE
Mercedes Gle (2019-2026 / V167) In this short and simple guide, we will see how to use the automatic transmission of the Mercedes GLE, following the instructions below. First of all…
How to reset the service in the Mercedes GLE?
How to reset the service in the Mercedes GLE?
Mercedes Gle (2019-2026 / V167) In this tutorial we can see how to reset the tire pressure warning light in the Mercedes GLE, an extremely simple and quick operation, to be done onl…
How to Reset the Service Light on a 2022 Mercedes GLE
How to Reset the Service Light on a 2022 Mercedes GLE
Mercedes Gle (2019-2026 / V167) Let's see how to reset the service light on a 2022 Mercedes GLE: turn on the ignition, then press and hold the "back" and "ok" buttons simultaneously…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos