Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on Mercedes E

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door trim panel

See other generations:
Video tutorial

Remove the door panel for maintenance or to replace it. Here’s how to do it on a Mercedes. Disconnect the battery terminals located in the engine compartment.

Remove the inner cover of the mirror and the cover underneath it. Unscrew the fastening screws inside, unscrew the screws on the handle (after removing the plastic screw covers). Detach the retaining clips of the panel.

Finally, pull the panel off by hand and disconnect it from the door (disconnect the power wiring and the opening cable). Perform the desired maintenance inside the door.

Replace or reinstall the same panel.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Remove the Door Panel on Mercedes E
Remove the Door Panel on Mercedes E
Mercedes Classe E (2009-2016 / W212) How do you remove the door panel of a Mercedes E? Let's see how to take off the panel to access the inside of the door for maintenance. Open the door…
Removing the Rear Door Panel
Removing the Rear Door Panel
Mercedes Classe E (1995-2002 / W210) The video demonstrates the steps needed to remove the rear door panel of your Mercedes E-Class. First, you need to remove a few screws, with their po…
How to Remove the Door Panel on a Mercedes E-Class
How to Remove the Door Panel on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Replace the door panel on your Mercedes E-Class if it is irreparably damaged and cannot be repaired. Use a plastic trim tool to pry off the cover und…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos