Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Steering Tie Rod End on Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tie rods

See other generations:
Video tutorial

Are the tie rod ends damaged? Let's see how to remove them on a Mercedes A-Class. Position your car on a column lift and raise it to a comfortable working height.

Remove the front wheel bolts with a socket wrench or air drill and take the wheel off. Next, start loosening the tie rod end bolts with a socket wrench. Under the tie rod end and stabilizer bar, there are bolts: remove them and pull the tie rod end away from the vehicle body.

Install the new tie rod end and tighten it with all the associated bolts. Reinstall the wheel that was removed earlier.

Lower the Mercedes to the ground and check the operation.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Steering Column Removal for Mercedes A-Class
Steering Column Removal for Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. to remove the steering column from a Mercedes A-Class. First, get inside the vehicle and use a hex wrench to remove the side screw of the steering wheel... …
How to Replace the Power Steering Pump on a Mercedes A-Class W168
How to Replace the Power Steering Pump on a Mercedes A-Class W168
Mercedes Classe A (1997-2004 / W168) .. replace the power steering pump on a Mercedes A-Class W168. First, open the hood and start by removing the battery to access the power steering pump.. …
What Components to Remove to Replace the Timing Belt on a Mercedes A-Class?
What Components to Remove to Replace the Timing Belt on a Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. for replacing the timing belt on the Mercedes A-Class by opening the hood and removing the air filter housing and the ECU. These steps, along with removing.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos