Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Left Front Headlight of the Mercedes Class B

Model: Mercedes Classe B MK 2, W246 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

To replace the front headlight of the second generation Mercedes Class B W246, it is first necessary to unclip the bumper. Do not fully remove it, as the headlight is positioned underneath the bumper; once the front bonnet is opened, remove the seal along the closure line, unscrew all the fixing screws along the same line, and then remove the screws that connect the wheel arch edge to the bumper edge.

At this point, unscrew the screw that secures the bumper edge to the wing and unclip it to move it away from its housing and proceed to remove the headlight. During reassembly, ensure the bumper is hooked to the headlight before securing it.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Mercedes B-Class W245
How to Replace the Front Headlamp Bulb on a Mercedes B-Class W245
Mercedes Classe B (2005-2011 / MK 1, W245) Replacing the dipped beam bulb (H7 fitting) of the left front headlamp (driver's side) on the Mercedes B-Class W245 is quite simple. Once the bonnet …
How to Replace the Front Headlamp Bulbs on a Mercedes B-Class
How to Replace the Front Headlamp Bulbs on a Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) How to replace the front headlamp bulbs on a Mercedes B-Class. Open the front bonnet by pulling the lever located at the bottom right of the dashboar…
How to Replace the Left Rear Headlamp Bulb on a Mercedes B-Class
How to Replace the Left Rear Headlamp Bulb on a Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) When the left rear headlamp bulb on a Mercedes B-Class does not light up, it needs replacing as soon as possible. To replace it, you must: - open the…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos